United Steel (Shandong) Co., Ltd
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
2024 aluminum plate is a typical duralumin in al-cop-magnesium system with reasonable composition and good comprehensive properties.
The alloy is produced in many countries and is the most widely used duralumin.
The characteristics of the alloy are: high strength, a certain degree of heat resistance, can be used for working parts below 150℃.
The strength of 2024 alloy is higher than that of 7075 alloy at temperatures above 125℃.
VIEW MORE +
The alloy is produced in many countries and is the most widely used duralumin.
The characteristics of the alloy are: high strength, a certain degree of heat resistance, can be used for working parts below 150℃.
The strength of 2024 alloy is higher than that of 7075 alloy at temperatures above 125℃.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
VIEW MORE +
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
6061 is a common duralumin with good machinability and moderate strength.
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
VIEW MORE +
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
VIEW MORE +
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
5052 aluminum sheets belong to Al-Mg aluminum alloy, where magnesium is the main element inside.
This kind of alloy is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening.
It can be polished and has good corrosion resistance, excellent weldability, but poor machinability.
5052 aluminum sheets have been certified by ASTM B209 and our production are all conducted according to international standards.
VIEW MORE +
This kind of alloy is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening.
It can be polished and has good corrosion resistance, excellent weldability, but poor machinability.
5052 aluminum sheets have been certified by ASTM B209 and our production are all conducted according to international standards.
Galvalume sheet G550 belongs to high-strength series galvalume sheet, with high requirements for tensile strength and yield strength. Its minimum yield strength is 560Mpa, minimum tensile strength is 650Mpa, and zinc layer thickness is 275g/m2. It has strong corrosion resistance and is mainly used for building structures with high strength requirements, such as Z-shaped steel, C-shaped steel, floor bearing plate, etc.
VIEW MORE +
ADDRESS
0907-2, Commercial Office Building, No. 2, Contemporary International Plaza, Dongchang East Road, Development Zone, Liaocheng City, Shandong Province
GET A FREE QUOTE
