图片名称

Aluminium Sheet Coil

Al metal alloy: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000 series etc
Alu temper: O - H112, T3 - T8, T351 - T851 etc
Thickness: 0.3mm - 6mm
Width: 900mm - 1600mm
VIEW MORE +

6061-T6 Aluminum foil

The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
VIEW MORE +

1100 Aluminum foil

1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
VIEW MORE +

Aluminum Foil Roll

Aluminum foil surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.
aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.
at high temperature or low temperature, aluminum foil will not have the phenomenon of oil permeability.
VIEW MORE +

1070 Aluminum Angle

1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
VIEW MORE +

PPGL DX52D

PPGI is galvanized color sheet coils,PPGL is galvalume color sheet coils, both are color plates, the substrates are different, one is galvanized structure, the other is galvalume structure, the substrate is different, which determines the difference in performance.
VIEW MORE +
< 1234...56 >